Commercial Roofing Systems

WELCOME TO OUR COMMERCIAL ROOFING SYSTEMS BREAKDOWN PAGE

On this page we breakdown some of the products that we offer for Commercial Roofing Systems including: EPDM, TPO and Modified Bituman Single Ply solutions.

EPDM

Click the product headings below to see more information.

  1. 1
    Vapour Adhesive
    Mule-Hide Logo

    CCW-702 and 702LV are solvent-based, high-tack adhesives specifically designed to promote maximum adhesion of Mule-Hide VapAir SealTM 725TR Air and Vapor Barrier/Temporary Roof to approved substrates. These products are also used as a surface prep to promote adhesion of FAST® Adhesive. CCW-702 and 702LV are available in 5-gallon pails; a full pallet consists of 45 pails.


    Features & Benefits:

    • Enhances the bond between Mule-Hide’s F5 Air & Vapor Barrier/Temporary roof and approved substrates
    • Can be walked on once cured/ flashed off
    • Acts as a surface prep to enhance the adhesion of FAST Adhesive

  2. 2
    Vapour Barrier
    Mule-Hide Logo

    Mule-Hide F5 Air & Vapor Barrier is a 40 Mil composite consisting of 35 Mils of self-adhering rubberized asphalt laminated to a 5 Mil woven polypropylene film. A siliconized one-piece release liner prevents the material from bonding to itself in the roll and is easily removed for installation. F5 Air & Vapor Barrier is available in a 244 sq. ft. roll with dimensions of 39″ x 75′. The factory-controlled thickness of the membrane ensures uniform barrier properties, and the woven polypropylene film increases strength and has a non-skid surface suitable for the bonding of subsequent layers.


    Features & Benefits:

    • Factory-controlled thickness ensures uniform barrier properties
    • Compatible with a variety of membranes and substrates
    • Non-skid surface provides extra safety on the jobsite
    • Can be used as a temporary roof for up to 120 days
    • Easily removable release liner

  3. 3
    Insulation
    Atlas Logo

    Closed-cell polyisocyanurate (polyiso) foam core integrally bonded to inorganic coated glass facers. ACFoam-III is offered in a variety of thicknesses, providing long-term thermal resistance (LTTR) values from 5.7 to 26.8. Available in 4ft x 8ft (1220mm x 2440mm) and 4ft x 4ft (1220mm x 1220mm) panels. Manufactured in accordance with ASTM C1289, Type II, Class 2, Grade 2 (20 psi) or Grade 3 (25 psi) and CAN/ULC-S704 Type 2, Class 3 or Type 3, Class 3.

  4. 4
    Bonding Adhesive
    Mule-Hide Logo

    Mule-Hide Bonding Adhesive is a high strength solvent-based contact adhesive that allows quick bonding of EPDM membrane and cured flashings to various porous and non-porous substrates. May be used on both horizontal and vertical surfaces. Formulated for application with a 1⁄2” (13 mm) medium nap roller.


    Features & Benefits:

    • High strength adhesive with quick bonding characteristics
    • Ease of application with a medium nap roller
    • Provides excellent adhesion between EPDM membranes and a variety of substrates

  5. 5
    Fastener & Plate
    SFS Intec Logo

    Insulation Plates are used with Insulation Fasteners to anchor down roof insulation.


    Features & Benefits:

    Galvalume Steel 3″ Round Insulation Plate

    • OD: 3″ Round
    • ID: .260″
    • Thickness: . 019″
    • Finish: AZ50 Galvalume
    • Available pre-assembled to Dekfast #12 Phillips or hex head fastener

  6. 6
    Membrane
    Mule-Hide Logo

    Mule-Hide membranes are manufactured under strict quality control and are available in a wide range of sheet sizes, lengths and membrane thicknesses through the largest nationwide distribution channel.


    Features & Benefits:

    • The Fully Adhered System using Acrylic Water Base Bonding Adhesive for fast installation means maximized installed cost value.
    • Fully Adhered Systems are ideally suited for irregular building configurations as well as steeply sloped commercial roofs, using solvent-based adhesive.
    • Simple and versatile Mule-Hide Tape Products make installation faster and easier.
    • UL and FM listed assemblies available
  7. 7
    Seam Tape
    Mule-Hide Logo

    Mule-Hide In-Seam Tape is a black/white, butyl rubber-based adhesive in tape form. The product has been formulated to provide high green strength in both shear and peel. Mule-Hide’s In-Seam Tape has a clear, durable poly release film.


    Features & Benefits:

    • Contains no solvent
    • Labor savings up to 50%
    • Superior tack and green strength
    • Superior peel and shear strength
    • Ease of installation
    • Reduces application problems of adhesives
    • Strength improves with age

  8. 8
    Tape Primer
    Mule-Hide Logo

    Mule-Hide EPDM Tape Primer is a solvent-based product designed for one-step cleaning and priming of EPDM and TPO surfaces to be bonded with In-Seam Tapes, Uncured Flashing Tapes, Cured Cover Tapes, and Pre- Taped membranes.


    Features & Benefits:

    • Promotes excellent adhesion with Tape Products
    • One step cleaner and primer

  9. 9
    Termination Bar
    Platinum Technologies Logo

    Termination Bar is intended for attaching and sealing flashing termination.


    Features & Benefits:

    • Prefabricated with strong, light-weight aluminum
    • Flexible to adapt to building irregularities
    • Pre-drilled every 6″ and in 10′ lengths x 1″ wide x 1/8″ thickness
    • Holes are 3/8″ X 5/16″
    • 1/8″ lip sealant edge for secure seal
    • Professional neat and tidy terminations
    • Aluminum will not rust and stronger than plastic
    • Aluminum is 6063 T-5 grade and corrosion resistant

  10. 10
    Water Cut Off Mastic
    Mule-Hide Logo

    Mule-Hide Water Cut-Off is a one-part, low viscosity, self-wetting, butyl-blend mastic designed for sealing Mule-Hide membranes to wood, concrete, metal, plastic and other substrates. This product is an extremely tacky material and will remain so when used with a compression–type seal.


    Features & Benefits:

    • Excellent adhesion to various substrates
    • Provides a durable compression type seal
    • Versatile applications

  11. 11
    Universal Sealant
    Mule-Hide Logo

    A 100% solids, solvent free, one-part, polyether sealant that provides a weather tight seal to a variety of building substrates. Provides excellent adhesive to substrates such as stone, masonry, ceramic, marble, wood, steel, aluminum, most plastics and composites. Not recommended as a glass-glazing sealant.


    Features & Benefits:

    • Excellent adhesion to various substrates
    • VOC free
    • Versatile applications

  12. 12
    LAP Sealant
    Mule-Hide Logo

    Mule-Hide EPDM Lap Sealant is a one-part, black, elastomeric sealant designed for sealing the exposed edge of field fabricated rubber membrane splices and laps.


    Features & Benefits:

    • Excellent adhesion to various substrates
    • Expands and contracts with EPDM membrane
    • Seals exposed edges of EPDM membrane and provides a durable barrier to weather extremes

  13. 13
    Pre-cut Corners
    Mule-Hide Logo

    Mule-Hide Pre-Cut Inside/Outside Corners consist of .060 inch (1.5mm) thick uncured EPDM flashing material laminated to cured butyl rubber tape and rolled onto a poly release liner providing .090 mils (2.25mm) of total thickness.


    Features & Benefits:

    • Pre-cut corners increase installation speed by eliminating cutting time eliminating
    • Pre-applied adhesive eliminates need to apply splice adhesive
    • Cleaner appearance as all corners are cut to same size

EPDM Commercial Roofing System
Contact Herman’s about EPDM roofing system products
  • 7 + 13 =

TPO

Click the product headings below to see more information.

  1. 1
    Vapour Barrier
    Lexcor Logo

    Lexcor PE-6 is a polymeric vapour retarder specifically designed for use with single-ply roofing systems and as a vapour retarder for walls and ceilings. PE-6 protects the roof insulation and membrane system components from the damaging effects of internal humidity.

    PE-6 may be used over any type of deck (concrete, steel, wood). Insulation must be either mechanically fastened or loose laid and ballasted. PE-6 sheets are normally loose laid onto the roof deck and then seamed together with Lexshield Tape or an approved sheathing tape.


    Features & Benefits:

    • Impermeable – PE-6 assures that the full insulating value of the insulation is retained over the long term.
    • Rugged & Resistant – PE-6’s heavy gauge film resists tears and abrasion due to strong winds or rough handling during construction.
    • Large Rolls – 2,000 sq. ft. rolls make installation exceedingly fast.
    • Easy to Seam – PE-6 sheets are quickly seamed together with Lexshield Tape or an acceptable sheathing tape.
    • Seals to Walls or Air Barriers – PE-6 can be effectively sealed airtight to all common air barrier systems including bitumen based systems.

  2. 2
    Insulation
    Atlas Logo

    Closed-cell polyisocyanurate (polyiso) foam core integrally bonded to inorganic coated glass facers. ACFoam-III is offered in a variety of thicknesses, providing long-term thermal resistance (LTTR) values from 5.7 to 26.8. Available in 4ft x 8ft (1220mm x 2440mm) and 4ft x 4ft (1220mm x 1220mm) panels. Manufactured in accordance with ASTM C1289, Type II, Class 2, Grade 2 (20 psi) or Grade 3 (25 psi) and CAN/ULC-S704 Type 2, Class 3 or Type 3, Class 3.

  3. 3
    Fastener & Plate
    SFS Intec Logo

    Insulation Plates are used with Insulation Fasteners to anchor down roof insulation.


    Features & Benefits:

    Galvalume Steel 3″ Round Insulation Plate

    • OD: 3″ Round
    • ID: .260″
    • Thickness: . 019″
    • Finish: AZ50 Galvalume
    • Available pre-assembled to Dekfast #12 Phillips or hex head fastener

    Galvalume Steel Round 2″ Barbed Plate

    • 22 Ga. Galvalume Steel
    • OD: 2″ Round
    • ID: .265″/.270″
    • Thickness: .032″
    • Finish: AZ55 Galvalume

  4. 4
    Membrane
    EverGuardTPO Logo

    Features & Benefits:

    • Outperforms standard TPO in heat aging and UV tests—the best predictors of TPO performance – Independent TPO Study proves EverGuard® TPO 60 mil Membrane is the best standard TPO in accelerated aging. – After accelerated heat aging at 275°F (135°C) for 112 days, EverGuard® TPO showed no cracking—while every one of the competitors’ samples had failed! – UV testing—Greater than 2.5 times the industry standard (ASTM D6878 weather resistance test)
    • Guarantees are available up to 25 years when using EverGuard® TPO 60 mil Membrane.*
    • Easier to install due to: -Large welding window – Most complete line of accessories – 10′ (3.05 m) wide sheets

  5. 5
    T-Joint Cover Patch
    EverGuardTPO Logo

    EverGuard® T-Joint Cover Patches are created from a proprietary TPO formulation engineered to work with EverGuard® TPO single-ply membranes. EverGuard® TPO T-Joint Cover Patches create a membrane seal over T-joints that arise when installing a 60 or 80 mil EverGuard® TPO system.


    Features & Benefits:

    • Reduces installed costs
    • Factory-built accessories reduce risk of leaks and callbacks
    • Uniform look

  6. 6
    Universal Corner
    EverGuardTPO Logo

    EverGuard® Universal Corners are molded from a proprietary TPO formulation engineered to work with EverGuard® TPO single-ply membranes. Inside Corners allow for fast flashing of base and curb corners.


    Features & Benefits:

    • Reduces installed costs
    • Factory-built accessories reduce risk of leaks and callbacks
    • Uniform look

  7. 7
    Bonding Adhesive
    EverGuardTPO Logo

    EverGuard® 1121 Bonding Adhesive is a contact-type bonding adhesive specially designed for bonding TPO single-ply roofing membranes and flashings to various roofing substrates. EverGuard® 1121 Bonding Adhesive is a general purpose rubber-based bonding adhesive for attaching TPO-based single-ply membranes to various substrates, including polyisocyanurate insulation and gypsum-based cover boards.


    Features & Benefits:

    • Excellent coverage up to 70 sq ft per gallon of bonded membrane
    • Easy application using roller or brush
    • Spray application also possible
    • High initial tack

  8. 8
    Drip Edge

    Commercial flashing with outward projecting lower edge protecting and covering the roof edge. Creates a finished look at the edge of the roof

TPO Commercial Roofing System
Contact Herman’s about TPO roofing system products
  • 3 + 11 =

Modified Bituman

Click the product headings below to see more information.

  1. 1
    Gypsum Fiber
    USG Logo

    USG Securock® Brand Gypsum-Fiber Roof Board’s unique, fiber-reinforced, homogenous composition gives the panel strength and water resistance through to the core. It provides exceptional bond and low absorption in adhered systems, and offers sustainable design for all types of roofing systems including single-ply, fluid-applied, built-up, spray foam, metal and modified bitumen roofing.


    Features & Benefits:

    • Exceptional bond and low absorption in adhered systems.
    • Moisture and mold resistant.
    • Excellent wind-uplift performance.
    • Manufactured from 97% recycled material.

  2. 2
    Primer
    Bakor Logo

    Aquatac Primer is a polymer emulsion based primer for self-adhesive membranes.


    Features & Benefits:

    • Quick drying
    • Environmentally friendly – Low VOC content
    • Highly tacky film provides positive adhesion to membrane
    • Non-flammable during application
    • Easily applied by spray
    • Water based, no solvent odors
    • Specially designed to provide a high level of tack on vertical surfaces

  3. 3
    Vapour Block
    Bakor Logo

    Vapor-Bloc® SA is a self-adhered vapour barrier membrane designed to be adhered directly to roof decks. Ideal application surfaces include steel decks, gypsum board and plywood or certain insulation panels prior to the application of finished roof coverings. The main function of Vapor-Bloc® SA is to serve as a full coverage vapour barrier and secondary waterproofing layer in the composition of roof assemblies.


    Features & Benefits:

    • 48” wide roll provides increased coverage over steel decks
    • SBS modified membrane can be applied in temperatures as low as –12°C
    • Excellent adhesion to prepared substrates of steel decks, gypsum board, concrete, plywood
    • Excellent compatibility with Bakor adhesives and air barrier membranes
    • Self adhesive, no flame required

  4. 4
    Adhesive
    Bakor Logo

    Thermostik® is used for bonding insulation boards such as polyisocyanurate, fibrous glass or mineral fibre to steel, wood, gypsum board or concrete in the construction of roof decks as well as to modified bitumen membrane air/vapour barriers, kraft vapour barrier, asphalt built-up vapour barriers, and Blueskin® Air/Vapour Barriers. It also can be used for laminating insulation panels to one another and for adhering fibreboard or Re-Cover Board panels to the insulation. Thermostik® 880-33 is compatible with and can be used to adhere insulation or fibreboard panels to aged asphalt or coal tar roofs.


    Features & Benefits:

    • Cold applied adhesive for polyisocyanurate insulation
    • Non-flammable during application
    • Sets rapidly and develops a strong bond
    • Medium consistency
    • Can be applied at temperatures below freezing
    • Compatible with asphalt and coal tar roofing

  5. 5
    Fastener & Plate
    SFS Intec Logo

    Insulation Plates are used with Insulation Fasteners to anchor down roof insulation.


    Features & Benefits:

    Galvalume Steel 3″ Round Insulation Plate

    • OD: 3″ Round
    • ID: .260″
    • Thickness: . 019″
    • Finish: AZ50 Galvalume
    • Available pre-assembled to Dekfast #12 Phillips or hex head fastener

    Galvalume Steel Round 2″ Barbed Plate

    • 22 Ga. Galvalume Steel
    • OD: 2″ Round
    • ID: .265″/.270″
    • Thickness: .032″
    • Finish: AZ55 Galvalume

  6. 6
    Insulation
    Atlas Logo

    Closed-cell polyisocyanurate (polyiso) foam core integrally bonded to inorganic coated glass facers. ACFoam-III is offered in a variety of thicknesses, providing long-term thermal resistance (LTTR) values from 5.7 to 26.8. Available in 4ft x 8ft (1220mm x 2440mm) and 4ft x 4ft (1220mm x 1220mm) panels. Manufactured in accordance with ASTM C1289, Type II, Class 2, Grade 2 (20 psi) or Grade 3 (25 psi) and CAN/ULC-S704 Type 2, Class 3 or Type 3, Class 3.

  7. 7
    Protection Board

    Protection Board is a continuously extruded flexible twin wall board made of polypropylene copolymer. Protection Board provides protection for all types of waterproofing membranes. Protection Board is used as protection of waterproofing membranes against possible damage during backfilling on a wide variety of applications such as foundation walls, roof decks, terraces, planters, promenades, etc.


    Features & Benefits:

    • Easy to handle.
    • Lightweight provides maximum labor savings.
    • No special tools required.
    • Can be cut easily or folded.
    • Compatible with either hot or cold applied waterproofing membranes.

  8. 8
    Base Sheet
    Bakor Logo

    modifiedPLUS NP180 Base Sheets are designed for use as the base or first ply in a high performance two-ply modified bitumen roofing system, or as a ply in two-ply Protected Membrane roofing system. Additionally, it can be used as a reinforcing sheet in 790-11 Hot Applied Rubberized Asphalt Systems.

    NP180p/p has a thermofusible poly upper and lower surface for torching to substrate and to receive torched on cap sheet


    Features & Benefits:

    • SBS polymer provides flow resistance at high temperatures and flexibility at low temperatures for lasting durability
    • Non-woven polyester 180g/m² reinforcement
    • Designed for application in new construction, re-roofing and retrofit roofing
    • Excellent tear resistance

  9. 9
    Cap Sheet
    Bakor Logo

    modifiedPLUS® NP250 Cap Sheets are used as the top ply in a two-ply roofing system and as a flashing membrane for modified bitumen roofing, conventional built-up roofing and as a maintenance repair material.

    NP250gT4 has a thermofusible poly lower surface for torching to substrate.


    Features & Benefits:

    • Factory applied surface granules to enhance ultra-violet resistance and surface durability</
    • Non-woven polyester, 250g/m²
    • Excellent puncture resistance, and tear strength
    • SBS polymer provides flow resistance at high temperatures and flexibility at low temperatures for lasting durability

  10. 10
    Loose Granules
    Bakor Logo

    Bakor loose granules used to cover and seal cap sheet seams.


    Colour Options:

    • Black/
    • Brown
    • Grey
    • White

  11. 11
    Adhesive/Primer
    Bakor Logo

    930-38 is a non-flammable adhesive designed for use with self-adhered SBS modified bitumen base sheets. The risk of primer flare-up is eliminated when modified bitumen cap sheets are thermofused to the self-adhered base sheet. 930-38 is used as a non-flammable adhesive in roofing applications for self-adhered SBS modified bitumen membranes such as modifiedPLUS NP180 Tack Sheet, and G100 Tack Sheet.


    Features & Benefits:

    • Non-flammable wet
    • Designed for brush applications
    • Quick tack

Modified Bituman Commercial Roofing System
Contact Herman’s about Modified Bituman roofing system products
  • 8 + 24 =
Other commercial roofing product manufactures we work with.

graceployglasscgc
gafiko
primeline
SFSstanmech